What do the numbers on skateboard trucks mean?

10
Adrianna Wolf asked a question: What do the numbers on skateboard trucks mean?
Asked By: Adrianna Wolf
Date created: Mon, Jun 7, 2021 9:56 AM
Date updated: Sat, May 28, 2022 6:44 AM

Content

Top best answers to the question «What do the numbers on skateboard trucks mean»

The greater the number preceding the "A", the harder the bushing. See the table below for a breakdown of bushing durometers by size. Aside from hardness, bushings can also vary by size. Many bushings are universal and will fit most trucks, but some will be specific to high or low trucks.

FAQ

Those who are looking for an answer to the question «What do the numbers on skateboard trucks mean?» often ask the following questions:

❓ What does 5.0 mean on skateboard trucks?

Most brands manufacture trucks that start at 5.0 inches and increase them by 1/4 inch scale. Just check the chart at the top of the page to see what I mean. That’s not the case with Royal though, their 5.5 inch is actually about 5

❓ What does trucks mean on a skateboard?

Skateboard trucks are the metal T-shaped pieces that mount onto the underside of the skateboard and keep your skateboard wheels and bearings securely attached to the deck. They are a key component to creating your own skateboard, and can affect the way you ride your custom complete.

❓ What do the numbers mean on skateboard wheels?

The diameter or height of a skate wheel is measured in millimeters (mm). Wheels used for quad skates range from approximately 47mm to 70mm in diameter. Wheels used for inline skates range from approximately 60mm-125mm. Small wheels will provide the maneuverability needed for aggressive skating, figure skating, roller dancing, and hockey.

9 other answers

2.2 Skateboard Trucks – The right height: Low, Mid/Standard, or High? The difference between high, mid /standard and low skateboard trucks is seemingly negligible. As it so often happens, however, the finer details are crucial. It all boils down to your body height and most importantly, the size of the wheels.

People are just used to what they skate and any change can mean a big difference. Not all people though, some don’t even feel a difference. I don’t really favor one brand, I like Thunder, Venture, and Independent for different reasons. Some trucks are of higher quality than others, check out the best skateboard trucks we tested. It doesn ...

Best Skateboard Trucks Review. And now, we continue with our comprehensive review of top 20 skateboard trucks in 2021! Independent Silver 139mm. This is probably one of the best skateboard trucks you’ll find on the market. It measures 139mm wide and is a set of 2 lo trucks. It comes in silver and has a high-performance.

Skateboard trucks are the metal T-shaped pieces that mount onto the underside of the skateboard and keep your skateboard wheels and bearings securely attached to the deck. They are a key component to creating your own skateboard, and can affect the way you ride your custom complete.

The first step to choosing skateboard trucks is understanding all the parts and how they work to make your skateboard turn. Baseplate - Mounts to the deck and houses the kingpin and pivot cup.; Hanger - The T-shaped part that holds the axle and the pivot.; Axle - Passes through the hanger and extends on each end to hold the wheels and bearings.; Pivot - Part of the hanger that extends into the ...

Most skateboard wheels are going to stay on the harder side, getting a 98a-101a rating. Some wheels like Bones will use the b scale rating which is 20 points higher than the a scale making an 84b = 104a.

Skateboard Trucks. Trucks are responsible for connecting and making the bridge between the skateboard and the wheels. In order to choose the right trucks, you need to understand how they work, what their components are, and how their size, profile/height, and width affect the riding.

Skateboard truck bushings are measured by durometer, or hardness. Most companies use the Durometer A scale, which ranges from 1-100 (the higher the number, the harder the bushings). A handful of companies use the Durometer B scale, which measures 20 points lower and allows the scale an extra 20 points for harder bushings.

This term is the relative hardness of the wheel and is described by an A-number. 100A is very hard, and 0A is soft. The durometer of the wheel has relevance for how well shocks are absorbed and for the grip. But also wear and speed depends on the durometer. The range of durometer for different wheel types and its relevance can be seen on this figure:

Your Answer

We've handpicked 25 related questions for you, similar to «What do the numbers on skateboard trucks mean?» so you can surely find the answer!

What size are skateboard trucks?
  • Standard skateboards range in width from of 6.5 to 8 inches and in length from 28 to 33 inches. The skateboard trucks will be the same width as the skateboard they are on.
What skateboard trucks are lightest?

The lightest skateboard trucks are the Tensor Mag Light Lo weighing 9.3 oz (8″, 231 grams) ...

Which trucks skateboard?

Due to the availability of skateboard trucks from a few top-rated brands like Independent, Thunder, Bullet, Tensor, Tracker, Tandem, it's very confusing for the buyers to understand what is the best brand of skateboard trucks.

Why are skateboard trucks called trucks?

This etymology almost certainly comes from analogy with the trucks, also known as bogies, on railroad cars. The trucks on a railroad car consist of an assembly of wheels, axles, bearings, and suspension, pivoted flexibly underneath the deck and ch...

What are skateboard trucks used for?

These skateboard trucks can be used for multipurpose skateboarding. They have highly precise ABEC-11 high-grade bearings that guarantee smooth turning and running. T-tool and all the stuff related to hardware are included in the set which is used in the adjustment and building of the skateboards.

What are trucks on a skateboard?

Typically, skateboard trucks consist of a base plate, hanger (the movable and grindable part of the truck to which your wheels are attached), the kingpin and kingpin nut which hold these two pieces together, as well as the bushings and the washers. The protruding part on which your wheels are attached is the axle.

What direction do skateboard trucks go?

Difference between Skateboard Trucks andLongboard Trucks:

Longboard trucks are usually reversed kingpins (the center bolt on which the hanger pivots), meaning the kingpin faces outwards. Standard kingpin trucks for short boards sit with the screw facing inside to protect it from grinds and whatnot.

What do wider skateboard trucks do?

Picking the Right Truck Width. A couple of pros skate narrow trucks that don't fit their board because it improves flip speed. Others like wider trucks because it provides a more stable ride. In general, just makes sure the axle width matches your deck's width.

What makes good skateboard trucks good?

Things like craftsmanship and quality of materials, as in anything else, affect performance and durability. Skateboard trucks are comprised of several integral parts: a base plate, a hanger, a kingpin, and some wheels are the basics.

What nuts do skateboard trucks use?

The standard size of a skateboard's axle nut 5/16"-24tpi, and needs a 1/2″ SAE wrench to install. When searching for them in a hardware store, make sure it has a self-locking feature, like a portion of nylon threads at one end.

What size are standard skateboard trucks?
  • The majority of trucks are produced to be suitable for most 7.5” to 9” + deck widths. Trucks are available in varying heights and each is better suited for various skateboarding styles and activities. In general, there are LOW, MID, and HIGH truck styles.
What size bolts for skateboard trucks?
  • Hardware. Hardware is necessary to attach the truck assembly to the actual skateboard deck and comes in sets of 8 bolts and 8 nuts. The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups.
What size screws for skateboard trucks?

Hardware is necessary to attach the truck assembly to the actual skateboard deck and comes in sets of 8 bolts and 8 nuts. The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups.

What size skateboard trucks to buy?

Medium (Mid) Height Trucks. Medium height skateboard trucks are great for all-around skateboarding. Suitable for skate street, parks or bowl/ramps but don’t excel in any. You can slap averagely sized wheels on them around 53 millimeters and 56 millimeters, some like them smaller others bigger.

What size trucks fit my skateboard?

For the perfect truck size, you are aiming to match the overall truck width to the deck width, for example, a 7.75" deck matches a 5.0" truck, an 8.0" deck matches a 5.25" truck.

What size trucks for 7.5 skateboard?

7.5″ 7.25 to 7.5″ 7.75″ 7.5” to 8.0″ 8.5″ 8.5” to 9.o″ 9.0″ 9.0” to 10.0” 10.0″ 10.o” and ...

What size trucks for my skateboard?

If you're using a 1/8" riser pad then a 1" truck bolt will cover you nicely ( 0.78" will be too short and the nuts will quickly fall off when you're riding your skateboard), If you're doubling up on your riser pads because you're riding a larger skateboard wheel then try a 1 1/4" bolt as the bolts will need to be longer.

What size wheels for skateboard trucks?
  • They should be used with small wheel sizes in the 50-to-53 millimeter range. Mid-level trucks are an all-round pick for street and park skateboarding, so they will require wheels in the 53-to-56 millimeter range. High trucks are the best option for longboarders and cruisers seeking to carve and ride comfortably across the streets.
What skateboard trucks are the best?

Best Skateboard Trucks Review

  • Independent Silver 139mm.
  • Thunder Polish Hi 147 High Performance.
  • Venture Polished Low Skateboard Trucks.
  • Silver Truck Company L-Class Pro.
  • TENSOR Skateboard TRUCKS.
  • Owlsome 5.0 Black Aluminum.
  • KRUX Skateboard Truck.
  • INDEPENDENT 129.
What skateboard trucks turn the best?

KRUX Skateboard Truck. The Krux K4 skateboard trucks are made for all type of players. Whether you’re a beginner, intermediate or expert skater, this product is guaranteed to hold your balance on the sharpest turns and those crazy tricks. It has some of the best cushions with a solid baseplate that nicely fits under the skateboard.

What tools do skateboard trucks use?

You can use a Phillips head screwdriver and a socket wrench, or a skate tool. Some people prefer using a skate tool because they have all the socket sizes you will need and tend to be pretty cool.

What trucks will fit my skateboard?

For the perfect truck size, you are aiming to match the overall truck width to the deck width, for example, a 7.75" deck matches a 5.0" truck, an 8.0" deck matches a 5.25" truck.

Are skateboard trucks cast?

Gravity cast skateboard trucks can be cast using sand moulds (“Sand Casting”) or CNC'd steel moulds.

Are skateboard trucks important?

Skateboard trucks are the metal T-shaped pieces that mount onto the underside of the skateboard and keep your skateboard wheels and bearings securely attached to the deck. They are a key component to creating your own skateboard, and can affect the way you ride your custom complete.

Are skateboard trucks reversible?

Longboard trucks are usually reversed kingpins (the center bolt on which the hanger pivots), meaning the kingpin faces outwards… Reverse kingpin longboard trucks are more responsive and make for a stable ride so it's perfect for cruising on longboards.