What are the best bolts for a skateboard?

10
Mandy Hartmann asked a question: What are the best bolts for a skateboard?
Asked By: Mandy Hartmann
Date created: Mon, Jun 21, 2021 3:09 AM
Date updated: Sat, May 14, 2022 9:21 PM

Content

Top best answers to the question «What are the best bolts for a skateboard»

I'd recommend the Phillips head screws, they tend to last longer than the Allen head ones. Though the bolts are stainless steel, the nuts are made from zinc. Whilst the bolts won't rust the nuts might so avoid riding over puddles or in rain. If you have a skateboard, the 1inch ones should be good.

FAQ

Those who are looking for an answer to the question «What are the best bolts for a skateboard?» often ask the following questions:

❓ What do skateboard bolts do?

Bolt packs, hardware, shorties or simply nuts and bolts, connect the skateboard deck to the trucks, and are thus a very crucial part of your skateboard setup. Here, you can learn about the different kinds of bolt packs and how to find the right bolt length.

❓ What size are skateboard bolts?

What size are skateboard bolts?

  • Hardware is necessary to attach the truck assembly to the actual skateboard deck and comes in sets of 8 bolts and 8 nuts. The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups.

❓ What size are skateboard truck bolts?

Skateboard bolts are the bolts used to hold the skateboard truck to the skateboard deck. Without them the skateboard would fall apart. If you're riding your skateboard trucks flat to the wood then 0.78" truck bolts will do the job nicely.

9 other answers

Skate hardware is the nuts and bolts that hold your trucks onto your deck. They come in a variety of shapes, sizes, fitments, and colors. Unlike other skate components, you don’t really get manufacturers that only produce skate hardware, the best skate hardware is usually made by Truck or Wheel companies. Size & Diameter

Bolt packs, hardware, shorties or simply nuts and bolts, connect the skateboard deck to the ...

Skateboard hardware AKA mounting hardware are the bolts used to connected your trucks to your skateboard deck. Each truck attached to your deck requires 4 bolts and 4 locknuts. If your truck or deck has 6 holes the extra 2 are just there to give you an option or to allow for an old truck designs or adjust your wheelbase.

Considered as on the best skateboard hardware in the market, Genuine Parts Cross Bolts by Independent as the Phillips standard cross pattern. Independent hardware is aimed to have the best of the quality, and not only is it durable but also easy to use.

Skateboard hardware comes in many different lengths, and often includes one different colored bolt so you can mark the nose of the skateboard. Hardware will naturally wear over time, like other screws. If you notice that the bolts look stripped or rusty, it's a good time to invest in a new set.

HIGHEST QUALITY - BESIY Hardware is made to the highest standards in the industry. Bolts are made from full stainless steel and the nuts are made from steel coated in zinc; 100% SATISFACTION GUARANTEED - Beast Guarantee promises 100% satisfaction or your money back. Fast and easy customer service with professional skateboarders.

Skateboard bolts are the bolts used to hold the skateboard truck to the skateboard deck. Without them the skateboard would fall apart. If you're riding your skateboard trucks flat to the wood then 0.78" truck bolts will do the job nicely.

The first rule for every beginner is to select the exact skateboard hardware 10/32, choosing all the parts correctly. The clothing, protection, and footwear affect the process. I always advise everyone to buy quality, reliable ready-made kits at the beginning. If the smallest bolt is the wrong size, it can fly out and affect poor landing or speed.

There are a few options for how to fasten your board with different types of hardware. Allen Key or hex head bolts are the best. The shape of the hole makes it resist stripping. The L shape of the allen key makes it easier to hold when tighting hardware.

Your Answer

We've handpicked 25 related questions for you, similar to «What are the best bolts for a skateboard?» so you can surely find the answer!

Are all skateboard bolts the same?

Hardware is necessary to attach the truck assembly to the actual skateboard deck and comes in sets of 8 bolts and 8 nuts. The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers)… Use a 3/8” socket size tool to change hardware.

How tight should skateboard bolts be?

HOW DO I INSTALL SKATEBOARD HARDWARE? ... Make sure that you don't over tighten your hardware. Tighten them until they are flush with the top of the deck, but don't counter sink them to where the top of the bolt is below the top of the deck.

What nuts and bolts are used for skateboard trucks?

For this, you'll need mounting hardware. Skateboard truck mounting hardware consists of 8 bolts and 8 nuts. Most skateboards will require bolts that are about 1” long with 10/32 nuts.

What size bolts do i need for my skateboard?

3. How to get the right length for your skateboard setup! Selecting the right bolt length is ...

How tight should my skateboard bolts be?

The nuts should be tightened as far as they can be without impeding the spin of the wheel. Generally you should feel only a very minor amount of play if you try to move the wheel side to side. Occasionally a nut might work itself tighter or looser than originally set and should just be corrected.

How tight should skateboard truck bolts be?

You just need the proper tools. When tightening hardware, you need to tighten them from both sides using a 3/8 inch wrench or socket from the nut side, and your phillips screwdriver or your allen wrench from the bolt side… Make sure that you don't over tighten your hardware.

Does it matter what bolts i get for my skateboard?

Skateboard Hardware

Hardware is necessary to attach the truck assembly to the actual skateboard deck and comes in sets of 8 bolts and 8 nuts. The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups.

How to know what size bolts to get for skateboard?

The choice of size depends on it. For example, for an 8.25 skateboard, you can buy wheels with a diameter of 54 – 60 mm. You probably know that the wheels are soft and hard. For normal movement, you cannot confuse your head, and choose soft wheels.

What kind of bolts do you use on a skateboard?
  • Occasionally a nut might work itself tighter or looser than originally set and should just be corrected. Each truck is intended to be securely attached to the skateboard deck by a set of 4 bolts and 4 nuts (3/8"). We use philips head bolts on our SkateXS completes, some folks use an allen head.
What nuts and bolts do you need for a skateboard?

Next, you'll mount your trucks to your deck. For this, you'll need mounting hardware. Skateboard truck mounting hardware consists of 8 bolts and 8 nuts. Most skateboards will require bolts that are about 1” long with 10/32 nuts.

Are all skateboard truck bolts the same size?

Hardware is necessary to attach the truck assembly to the actual skateboard deck and comes in sets of 8 bolts and 8 nuts. The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers)… Use a 3/8” socket size tool to change hardware.

Can you use regular bolts on a skateboard?

But do they really have to be skateboard nuts and bolts? You really shouldn't use the nuts and bolts from your parents's toolbox to assemble your board. The hardware in skateboard bolt packs is specifically made to fit perfectly in the holes in your deck as well as into your trucks.

How to clean your skateboard nuts and bolts?

Use a 13mm or ½ inch socket wrench for the removal of the axle bolts and nuts on the outer sides of the wheels. Make sure to put all the wheel materials together in a place so you could find them easily when fixing back after cleaning. You should know this is necessary if you don’t want your skateboard to end up missing one or two components.

How to loosen the bolts on a skateboard?

To take off your truck, you’ll have to remove all the bolts that attach it to your board. You can use pliers for this, or when using your skateboard tool, use the smallest socket. 2. Place it on any of the nuts of your skateboard truck, then put the screwdriver to the screw inside that nut.

Where are the bolts on a skateboard truck?

Skateboard trucks can either sit flat on the deck or with a riser pad in between. Here's a simple rule to follow when choosing skateboard truck bolts. Skateboard bolts are the bolts used to hold the skateboard truck to the skateboard deck. Without them the skateboard would fall apart.

How are bolts and screws tightened on a skateboard?
  • Bolts are tightened by the nut but screws are tightened by an internal thread to where it is inserted. With that said, ask for bolts and nuts instead of screws. (2 piece set not the single) The hardware size varies with the skate deck style.
How are nuts and bolts attached to a skateboard?
  • Does bolt tightness significantly increase or decrease the strength of wood? As you can see in the pictures below the trucks are attached to the skateboard with four screws nuts and bolts, with a 2~3mm piece of rubber between the truck and the board.
How do you loosen the bolts on a skateboard?

By loosening the kingpin nut, it opens up more space between the bushings and allows the truck to lean more as you skate. Turn the kingpin nut anti-clockwise to loosen the trucks but do so in small increments and test as you go so as not to loosen the trucks too much. To tighten your trucks, turn the nut clockwise.

How many bolts do you need for a skateboard?

How to get the right length for your skateboard setup! Selecting the right bolt length is fairly simple. If you skate without shock or riser pads, you will only ever need 7/8” – 1” bolts. If you use standard shock pads, with a height of 1/8”, you’ll need 1” – 1 1/8” long bolts.

How many nuts and bolts between skateboard and truck?

Trucks are what makes your skates turn. They are adjusted by tightening/loosening the four 9/16” bolts or hex nuts between the wheels on the underside of your skates. Tighter trucks will feel more stable but less agile and will turn less easily. Deciding how tight to tighten your trucks is a personal choice.

Why are the bolts on my skateboard so tight?
  • It's always the wood that cracks (or the truck's axle, but that's irrelevant here). Also, the holes in the wood are pre-drilled, so the bolts aren't actually 'screwed' in the wood, but only held by the nuts on the other end. The countersinking you can see is mainly the grip tape on top of the wood that has rotated with the bolt.
How do you know what size bolts you need for a skateboard?

Selecting the right bolt length is fairly simple. If you skate without shock or riser pads, you will only ever need 7/8” – 1” bolts. If you use standard shock pads, with a height of 1/8”, you'll need 1” – 1 1/8” long bolts. The higher your shock pads, the longer your bolts need to be, of course.

Do you need nuts and bolts to build a skateboard?
  • You really shouldn’t use the nuts and bolts from your parents’s toolbox to assemble your board. The hardware in skateboard bolt packs is specifically made to fit perfectly in the holes in your deck as well as into your trucks.
How do you take the bolts off a skateboard truck?

To take off the truck, you'll have to remove all the bolts that attach it to your board. You can use pliers for this, or when using your skateboard tool, use the smallest socket. Place it on any of the nuts of your skateboard truck, then put the screwdriver to the screw inside that nut.

What's the difference between bolts and screws on a skateboard?
  • Screws function alone and have a sharp edge. Bolts are tightened by the nut but screws are tightened by an internal thread to where it is inserted. With that said, ask for bolts and nuts instead of screws. (2 piece set not the single) The hardware size varies with the skate deck style.