Should skateboard wheels be hard or soft?

9
Mariane Schmeler asked a question: Should skateboard wheels be hard or soft?
Asked By: Mariane Schmeler
Date created: Fri, Mar 26, 2021 1:41 PM
Date updated: Fri, Jun 24, 2022 8:22 PM

Content

Top best answers to the question «Should skateboard wheels be hard or soft»

Generally speaking harder wheels are faster, and softer wheels are slower with the added advantage of having more grip. Softer wheels are better suited to street skating, while harder wheels are better for smooth surfaces.

FAQ

Those who are looking for an answer to the question «Should skateboard wheels be hard or soft?» often ask the following questions:

❓ How to make hard skateboard wheels soft?

Check on the Tightness of the Axle Nuts. Loosen your nuts a bit to make your wheels turn faster. If the nuts are too tight will need more energy to push the wheels and, therefore, not ride at ease. But when doing your tricks, the tightness of the nuts may be the best.

❓ Which is better hard or soft skateboard wheels?

  • This practice often allows for more speed and durability in your skateboard wheels, since it gives them a combination of strengths from both ends of the measurement’s spectrum. Generally speaking, harder wheels are faster, and softer wheels are slower with the added advantage of having more grip.

❓ How hard should skateboard wheels be?

A well put together skateboard that has SPACERS inside the wheels, and speedrings on the hanger face and axle - CAN be tightened all the way without slowing down your roll. This is especially true for wheels with hard plastic cores that are more p...

8 other answers

Whether you’re a beginner or pro, soft wheels are excellent for grip and going long-distances. Trying both hard and soft wheel styles before you finalize a skateboard wheel purchase is simple. Just ask a friend or skateboard shop employee to test ride the skateboard with your preferred wheels.

Soft skateboard wheels are suitable for cruising and a comfortable ride. They don’t excel at tricks because they bounce a lot and stick to the surface. They deal better with small objects and rough roads. Hard wheels are more for skateboarders that like to perform technical tricks, but not suitable for cruising.

The state of a skate or longboard depends on how you stored it, where, and how actively you skated. In any case, you should check and set up everything before using it. The owner of a skateboard must follow many rules of adjustment and learn how tight longboard wheels should be, etc.

A very soft skateboard wheel offers high grip, maximum comfort and provides a smooth ride. Nevertheless, it wears fast and is extremely slow. A very hard skateboard wheel is extremely fast, highly reactive, and wears slowly. However, it has poor grip and vibrates with the slightest impact.

The wheels of your skateboard can help or hurt your ride, so choosing wheels with the proper hardness is vital. Softer wheels provider more grip, making them a good choice for street skating, but they are slower than harder wheels, which are a better choice for smooth surfaces, particularly skate parks.

We recommend choosing hard wheels for skate parks and street skating on ledges, rails, gaps and manual pads. Soft wheels are best for cruising, transportation and longboarding. Medium durometer wheels are great for beginners and for street skating on rough surfaces.

Soft wheels makes everything easier (landing,turning etc.) but slower,whereas hard wheels can give you the ability to go faster,but it should depend on the roads you use,if bumby,soft is the way to go,long roads-hard wheels will help you ride! 1 level 1

Longboard wheels are typically softer than skateboard wheels. Longboard wheels will typically have a hardness of 78a-81a which is soft enough to deal with rough terrain encountered on streets and sidewalks. A higher number here means a harder wheel. Skateboard Wheel Hardness. Skateboard wheels are typically harder than longboard wheels.

Your Answer

We've handpicked 23 related questions for you, similar to «Should skateboard wheels be hard or soft?» so you can surely find the answer!

Are skateboard wheels too hard?

Yes they're rougher and don't roll as far as soft wheels, but you can definitely do ollies on the road on them. That's exactly what they're for. If the board is stopping it sounds like you're not going fast enough.

Do soft skateboard wheels slow you down?

Finding the best skateboard wheels all comes down to personal preference based on the kind of skateboarding that you want to do. TIP: If you are beginner, we recommend a mid-sized (52mm-54mm) skate wheel with a medium durometer (90a – 99a).

How long do soft skateboard wheels last?

You can swap your wheels around about every 2 or 3 months, depending on how often you ride your skateboard. Rotating or swapping your wheels will increase prolong lifespan and your wheels will wear out more evenly.

What are soft skateboard wheels good for?

Soft wheel good for rough surfaces, longboards, or street boards that need lots of grip to easily roll over cracks and pebbles. Designed for smooth rides, cruising, longboards, hills, and rough surfaces. Slightly harder and faster with a little less grip, but the grip's still good.

What are the best soft skateboard wheels?

78a-87a wheels are soft wheels, good for rough surfaces, longboards, or street boards. They have lots of grip to easily roll over bumps and cracks. Designed for smooth rides, cruising, hills, and rough surfaces. 88a-95a wheels are slightly harder and faster wheels, with slightly less grip.

Should skateboard wheels turn?

There are no rules for how tight wheels should be. I tighten the nut on the wheel so that the bearings are all-the-way seated into the wheel, and then back it off an eighth or quarter turn. I like them to just barely wiggle back and forth on the axle. This makes them just a little louder and it feels right to me.

How hard is 81b skateboard wheels?

Due to their extreme hardness, they slide fast, accelerate quickly, a can reach very high top speeds. For this reason, they are ideally suited for technical skateboarding. On rough or very slippery surfaces, however, very hard wheels can be unpleasant to skate on.

What skateboard wheels are considered hard?

Pig Wheels are probably the best skateboard wheels’ money can buy. They are harder with a 100 durometer and is wrapped with ice white polyurethane which gives it a nice look at your board. They have a big Pig logo and are available in the range of 50mm and as much as 60mm.

Can you put soft wheels on a skateboard?

The answer is yes. A normal skateboard has a wheel diameter of 48-60mm and longboard, 63-75mm… A wheel with a lower durometer will grip better and with a high durometer, the tendency would be to slide. Skateboards have a harder wheel while longboards have softer wheels, the typical range being 75a-90a.

Can you use soft wheels on a skateboard?
  • Skaters who are looking for more speed in the skatepark can also use soft wheels on their regular sized skateboard deck. This customized style is phenomenal for riding concrete bowls or snake runs at higher speeds.
How to tell if skateboard wheels are soft?

Companies use a durometer scale to indicate the hardness of the skateboard wheels they make. The lower the number, the softer the wheel. Most manufacturers use the Durometer A Scale. For example, a skateboard wheel with a hardness of 78a would be considered very soft, while one labeled 100a would be hard.

When to put soft wheels on a skateboard?

Skaters who are looking for more speed in the skatepark can also use soft wheels on their regular sized skateboard deck. This customized style is phenomenal for riding concrete bowls or snake runs at higher speeds.

Should running shoes be soft or hard?

It must provide a soft ride, yet last a decent length of time. It must provide enough stiffness to help prevent any collapse of the foot or ankle, yet be flexible enough to let the foot behave as naturally as possible.

Which is harder a hard skateboard or a soft skateboard?
  • Skateboard wheel durometer readings typically go by scale A or B. Common skateboard wheels will have a number-letter combo such as “73A” or “101A” in their description…. That represents their durometer. The lower the number, the softer the wheel, the higher the number, the harder the wheel.
What's the difference between hard and soft wheels in skateboarding?
  • The rule of thumb is that softer wheels are for cruising and longboarders, hard wheels for popping technical tricks. Let’s say you just got into skateboarding but don’t want to do any tricks. You might consider a bit cruising, hopping a few curbs, or maybe commuting on campus.
Do skateboard wheels get hard over time?

In addition, since the wheels are made of urethane, which has different properties, they wear down over time. The problem with low-quality skateboard trucks is that they bend when overweight, though the wheels will rub and eventually wear down the wheels.

How long do hard skateboard wheels last?

The answer depends on various elements. After 3 months of usage, I've discovered that wheels begin to underperform, and their grip begins showing signs of wear. Of course, skateboard wheels made of durable materials will last a longer time, but on average, their lifespan is around three months.

How tight should skateboard wheels?

Skateboarders looking to satisfy their need for speed will agree that tight skateboard wheels perform so much faster and provide better stability. In this article, I’ll help you find out how tight should skateboard wheels be. The answer depends largely on your skill level, riding style, as well as safety and comfort…

Should skateboard wheels be loose?

Clean your skateboard wheels, etc. The longboard is used for long-distance driving. So you need to tighten the trucks. If you like to do tricks with the usual skate, then trucks should be loosened. Everything is simple enough. You just have to try. Then your tool will serve you long.

Should skateboard wheels be stiff?

Some skaters like to leave their wheels loose for the skatepark, which makes them screech or “bark” when you slide. This is important for some skaters who associate with the auditory cue. If you keep them fully tight they will “hiss” when sideways and generally be very smooth.

Should skateboard wheels have grooves?

Skateboard wheel size matters a lot. If the wheels are too big you’ll have a hard time landing tricks and the wheels might come into contact with your board. On average you should pick wheels between 52 and 54 millimeters depending on what and where you skate. It’s not only the diameter that matters, the hardness and quality of the ...

Should skateboard wheels spin fast?

Fast hand spin does not always result in a fast board. The first instinct we all have when getting our hands on a new bearing/wheel combination is to give the wheels a hard and fast hand spin. The idea is that if the wheel spins fast, we have a speedy ride. If slow, the bearings suck.

Should skateboard wheels spin freely?

Simply there should be a wiggle space and your wheels should turn freely. If you try so spin your wheels hard, do they stop almost instantly? If so, they are to tight! Try to “move” them along the truck axle rapidly.