Should i loosen my skateboard wheels?

11
Nathen Stokes asked a question: Should i loosen my skateboard wheels?
Asked By: Nathen Stokes
Date created: Thu, Apr 22, 2021 5:30 PM
Date updated: Wed, Jul 6, 2022 4:50 PM

Content

Top best answers to the question «Should i loosen my skateboard wheels»

Flipping the board upside down, this is the large nut which is at the end of the "kingpin" bolt of each truck. We recommend loosening the nut on each truck a half or quarter turn counterclockwise at a time, then given the board a try. Don't over loosen to the point that you risk having the nut fall off the kingpin.

Your skateboard wheels should be tight enough that they spin freely… If the wheel stops spinning after a few seconds, you'll want to loosen them. It's also possible to over-tighten skateboard wheels, and that will prevent you from getting the most speed out of your board.

FAQ

Those who are looking for an answer to the question «Should i loosen my skateboard wheels?» often ask the following questions:

❓ Should you loosen skateboard wheels?

Your skateboard wheels should be tight enough that they spin freely… If the wheel stops spinning after a few seconds, you'll want to loosen them. It's also possible to over-tighten skateboard wheels, and that will prevent you from getting the most speed out of your board.

❓ How to loosen skateboard wheels?

How to Loosen Skateboard Wheels? Flip your skateboard upside down so your wheels will face you. You will notice a large-sized at the end of the kingpin... Now with the help of a wrench turn the kingpin so it can loosen from the joints. At first, try to loosen just a half or... After loosening the ...

❓ Can i loosen my skateboard wheels?

You can actually hear loose wheels when you skate… If the wheel comes to a sudden halt and rolls back slightly the other way, it's too tight. Use the wrench to loosen the nut, but do so only slightly. Just nudge it counter clockwise and spin the wheel again.

9 other answers

You may loosen it for skateboarding in a technical style and fast riding. But do not overdo the loosening and tightness when adjusting trucks. Too tight trucks will prevent normal turning .

I hope this article did some teaching to you about how to loosen wheels on a skateboard. At last, I would love to remind two very important tips for you, my lovely readers. Those are- while testing the tightness or loosen by riding, carry the necessary tools with you and always check the bolt with a kingpin that it won’t fall out.

I always tighten my bearings. Continue Reading. A well put together skateboard that has SPACERS inside the wheels, and speedrings on the hanger face and axle - CAN be tightened all the way without slowing down your roll. This is especially true for wheels with hard plastic cores that are more precise.

I am currently using a old skateboard my cousin gave to me, and I seem to be having trouble the wheels on my skateboard. Two of the wheels seem to be spinning slower compared to the other two wheels. The only way I can fix this is to loosen the two slower wheels up more so it can spin at the same speed as the others.

Don't over loosen to the point that you risk having the nut fall off the kingpin. A full turn should give a noticeable change. Some skaters eventually develop a preference for a tighter truck on the front or the back, we'd recommend keeping the two trucks consistent with each other until the skater develops.

Why Should We Loosen Skateboard Trucks Skating is all fun and exciting. From kids to youngsters to young adults – the game doesn’t discriminate when it comes to bestowing one with a crazy good time. Loosening your trucks will make your rides more comfortable, resulting in a safe & smoother ride.

Learn how to adjust your skateboard setup, tighten trucks, loosen wheels or vice versa. From time to time your skateboard will need a quick tune-up! Watch th...

My wheels and bearings are good but my skateboard doesn't roll when I stand on it. Honestly, by now your problem should be solved, but just in-case you are still suffering from a lack of resting time on you skateboard, let's check the trucks for bad bushings.

Now, most skateboards turn a bit on their own and as long as it doesn’t affect you when you’re riding you should be fine. Your skateboard turns on its own because of bad bearings, faulty bushings, worn down wheels, loose screws, loose trucks, bent axles or it could even be your skateboard deck.

Your Answer

We've handpicked 21 related questions for you, similar to «Should i loosen my skateboard wheels?» so you can surely find the answer!

How do you loosen the tight wheels on a skateboard?

Use the wrench to loosen the nut, but do so only slightly. Just nudge it counter clockwise and spin the wheel again. If it still comes to a quick stop, bump it backwards again. Continue doing this until each wheel rolls freely.

How tight should skateboard wheels?

Skateboarders looking to satisfy their need for speed will agree that tight skateboard wheels perform so much faster and provide better stability. In this article, I’ll help you find out how tight should skateboard wheels be. The answer depends largely on your skill level, riding style, as well as safety and comfort…

Should skateboard wheels be loose?

Clean your skateboard wheels, etc. The longboard is used for long-distance driving. So you need to tighten the trucks. If you like to do tricks with the usual skate, then trucks should be loosened. Everything is simple enough. You just have to try. Then your tool will serve you long.

Should skateboard wheels be stiff?

Some skaters like to leave their wheels loose for the skatepark, which makes them screech or “bark” when you slide. This is important for some skaters who associate with the auditory cue. If you keep them fully tight they will “hiss” when sideways and generally be very smooth.

Should skateboard wheels have grooves?

Skateboard wheel size matters a lot. If the wheels are too big you’ll have a hard time landing tricks and the wheels might come into contact with your board. On average you should pick wheels between 52 and 54 millimeters depending on what and where you skate. It’s not only the diameter that matters, the hardness and quality of the ...

Should skateboard wheels spin fast?

Fast hand spin does not always result in a fast board. The first instinct we all have when getting our hands on a new bearing/wheel combination is to give the wheels a hard and fast hand spin. The idea is that if the wheel spins fast, we have a speedy ride. If slow, the bearings suck.

Should skateboard wheels spin freely?

Simply there should be a wiggle space and your wheels should turn freely. If you try so spin your wheels hard, do they stop almost instantly? If so, they are to tight! Try to “move” them along the truck axle rapidly.

Should you clean skateboard wheels?

If your skateboard is feeling kind of sticky as you ride it, it might be time to give your wheels a clean. Your wheels and bearings can get blocked up with dirt and rocks, which can lead to a not-so-smooth feel.

Should you rotate skateboard wheels?

Rotating your wheels regularly will make them last longer, because they will wear more evenly. Skate wheels usually wear out faster on one edge than the other, and most people wear down some of their wheels faster than others.

How do you loosen skateboards wheels?

Hope you guys enjoyed this skate tutorial if you want me to make anymore just let me know comment below what kind of skate videos you want to see and what ki...

What tool do you use to loosen the wheels on a skateboard?

The Axle nuts hold your wheels on. They are 1/2″ size so you need a 1/2″ wrench to tighten and loosen them. You need either a socket or a flat wrench to remove these nuts to rotate your wheels and change your wheels and bearings.

How fast should skateboard wheels spin?

First of all, let’s start with the obvious reason why your skate wheels aren’t spinning fast – the wheel nuts are too tight. When they become too tight, they will rub against the bearing, and when they do, friction occurs. As you know, friction is a force that resists motion between to bodies in contact. Friction causes both the bearings and wheels to not spin fast. Simply put, nuts that are overly tightened are the architect of your slow speed when skating. Most times, it isn’t the ...

How freely should skateboard wheels spin?

There are no rules for how tight wheels should be. I tighten the nut on the wheel so that the bearings are all-the-way seated into the wheel, and then back it off an eighth or quarter turn. I like them to just barely wiggle back and forth on the axle. This makes them just a little louder and it feels right to me.

How hard should skateboard wheels be?

A well put together skateboard that has SPACERS inside the wheels, and speedrings on the hanger face and axle - CAN be tightened all the way without slowing down your roll. This is especially true for wheels with hard plastic cores that are more p...

How long should skateboard wheels last?

After 3 months of usage, I've discovered that wheels begin to underperform, and their grip begins showing signs of wear. Of course, skateboard wheels made of durable materials will last a longer time, but on average, their lifespan is around three months.

How long should skateboard wheels spin?

As long as they don't stop 2 seconds after you spin them by hand you'll be fine.

How loose should skateboard wheels be?

Clean your skateboard wheels, etc. The longboard is used for long-distance driving. So you need to tighten the trucks. If you like to do tricks with the usual skate, then trucks should be loosened. Everything is simple enough. You just have to try. Then your tool will serve you long.

How much should skateboard wheels cost?

Skate wheels should cost you between $30 and $50. A good skate wheel would be the Spitfire Bigheads. They roll fast, roll smooth and last a long time. They are the choice for many skaters.

How much should skateboard wheels move?

Wheels are attached to the axels with a single nut (1/2") per wheel. The nuts should be tightened as far as they can be without impeding the spin of the wheel. Generally you should feel only a very minor amount of play if you try to move the wheel side to side.

How tight should skateboard wheels be?

Wheels are attached to the axels with a single nut (1/2") per wheel. The nuts should be tightened as far as they can be without impeding the spin of the wheel. Generally you should feel only a very minor amount of play if you try to move the wheel side to side.

Should i buy new skateboard wheels?

There are a couple of signs to see it’s time to get new wheels. It’s time to replace your skateboard wheels when they are irregular shaped, show signs of flat spots, coning, or major flat spots. Irregularly shaped wheels are very uncomfortable to ride can make the difference in landing a trick or not.