How wide are standard skateboard wheels?

Horacio Kris asked a question: How wide are standard skateboard wheels?
Asked By: Horacio Kris
Date created: Mon, Mar 15, 2021 3:01 AM
Date updated: Tue, Sep 27, 2022 5:29 PM


Top best answers to the question «How wide are standard skateboard wheels»

Skateboard wheel diameter is measured in millimeters and the size range is generally 49mm to 75mm. 26 millimeters may seem insignificant if you haven't experimented much with different sized skate wheels, but even a couple millimeters will make a difference to experienced skaters.


Those who are looking for an answer to the question «How wide are standard skateboard wheels?» often ask the following questions:

❓ How wide are skateboard wheels?

it might depend on the size of the skateboard but mine are 2 inches exactly

❓ What are standard skateboard wheels?

Standard skateboard wheels have a diameter ranging from 54 to 59 mm. They're best for beginner riders and larger skaters who mainly do bowls, vert ramps, skatepark, and street skating. And if a skateboard wheel has a diameter of between 50mm and 53mm, it's considered small.

❓ What size are standard skateboard wheels?

Skateboarding wheel sizes generally range from 48mm to 60mm and different sizes are better suited to certain types of skateboarding or terrain. Smaller skateboarding wheels are suitable for skating flatground. Wheels under 50mm were popular throughout the 1990s but now most wheel companies begin sizing at 50mm.

9 other answers

Choosing the bearing size for your skateboard wheels can never go wrong, and you can be assured of it. An 8mm core, 7mm width, and 22mm outer diameter are universalized as the standard size skateboard bearing size and these measurements are meant to fit any wheel you choose.

Skateboard wheel diameter is measured in millimeters (mm); most wheels range from 50-75 mm, and the lower the number, the smaller the wheel. Wheel diameter also affects how quickly you accelerate and how tightly you can turn. Smaller wheels result in a slower ride, whereas larger wheels result in a faster one.

Skateboard wheel diameter is normally measured in millimetres, and most wheels range from 50-75mm. So if you need small wheels, shop around the 50mm end of the scale. Similarly, if you’re looking for big wheels, shop around the 70mm end of the scale.

The most common range for street and park skating is between 50mm and 60mm, while wheels larger than 60mm are usually used on longboards or cruisers.

Skaters that are 13+ or wear an adult shoe size of 8+, should be able to handle a full-sized skateboard (7.5" or wider). We offer mid-sized skateboards (7.25 - 7.375") for kids 9-12 years old, mini skateboards (6.75 - 7.25") for kids 6-8 years old, and even micro skateboards (6.5 - 6.75") for kids under 5 years old. Pre-Built or Custom Completes?

Any skateboard between 7.75″ and 8.25″ is a great all-around option for a wide variety of skating styles. Just remember, it’s all personal preference, there’s no right answer! Skateboard Deck Size – Length Skateboard deck length

Softer wheels have more bounce and your skateboard will be all over the place when you try to land a trick. For the best street skating wheels look for the following features: Wheels diameter between 49 mm and 53 mm. durometer A between 99A and 101A.

Hard wheels for street skating are typically in the Durometer range of 96A-101A and 83B-84B.

Most range between 75a to 104a. Any wheel in the 78a to 90a range is considered a soft wheel, 90a to 98a is in the middle, 99a+ is referred to as a hard wheel. We recommend choosing hard wheels for skate parks and street skating on ledges, rails, gaps and manual pads. Soft wheels are best for cruising, transportation and longboarding.

Your Answer

We've handpicked 21 related questions for you, similar to «How wide are standard skateboard wheels?» so you can surely find the answer!

How wide is a skateboard?

Micro Skateboard Deck width: 6.5″ – 6.75” with an average deck length of 27.2” – 27.6”. Micro decks are the best skateboards for beginners who are under 6 years old, less than 3’5” tall who wear a size 3 shoe or less. Mini Skateboard Deck width: 7.0″ with an average deck length of 28”.

Is 8.5 too wide skateboard?

If you wear shoes 9.5 or larger, we recommend getting a deck between 8.0 and 8.5 inches… Those who skate big bowls, hand rails, or like to jump down large gaps and stairs are usually more comfortable with a larger board (8.25 – 9.0 inches).

How wide is a standard 25m swimming pool?
  • This governing body mandates that a 25-meter pool used in competition is specifically 25 meters in width from the automatic officiating equipment installed at either end. The organization specifies that each pool must be at least 6.5 feet deep and must have at least eight lanes.
Are skateboard wheels expensive?

Skateboard wheels prices vary a lot. This is because of the quality of the polyurethane (plastic) and the research that went into it. The most expensive wheels are about $50, the cheapest which still have decent quality go for about $20 (mini logo).

Are skateboard wheels recyclable?

To reduce the greenhouse gasses that escape during the process of making skateboard wheels, recycling is valent effort. Although Polyurethane cannot be melted and reused, it can be shredded to be rebonded and compressed to be used in various padding products.

Are skateboard wheels white?

Skateboard wheels come in many colors, including swirls. The primary reason that most wheels are white has to do with the urethane used. The natural color of the material is an off-white, and adding color pigment may change the way the wheels react when riding in a very small way.

Do skateboard wheels expire?

Your board wheels start shaping after the way you take a turn, after a while, they get cone-shaped. It's pretty common they wear down unevenly as you probably favor one side more than the other. You can swap your wheels around about every 2 or 3 months, depending on how often you ride your skateboard.

Do skateboard wheels matter?
  • Skateboard wheel size matters a lot. If the wheels are too big you’ll have a hard time landing tricks and the wheels might come into contact with your board. On average you should pick wheels between 52 and 54 millimeters depending on what and where you skate.
Do skateboard wheels turn?

When the hangar rotates about the pivot axis, one wheel moves down and to the right, while the other moves up and to the left. So basically, when you lean, that pushes the wheel you're leaning towards "down" in the picture, or up toward the skate deck. This pulls it back, or "right".

How much skateboard wheels?

FREEDARE Skateboard Wheels and Bearings 52mm, Spacers, All-in-one Tool, Skateboard Riser Pads and Hardware Set. 4.2 out of 5 stars. 53. $16.99. $16. . 99. FREE Shipping on orders over $25 shipped by Amazon. +1 colors/patterns.

How skateboard wheels work?

Simply put, the skateboard wheels are the part of your skateboard that allow you to move, and help determine how fast you can go… Skateboard wheels are measured by both diameter and durometer. Diameter is the size of the wheel, and durometer is the hardness of the wheel.

How tight skateboard wheels?

Skateboarders looking to satisfy their need for speed will agree that tight skateboard wheels perform so much faster and provide better stability. In this article, I’ll help you find out how tight should skateboard wheels be. The answer depends largely on your skill level, riding style, as well as safety and comfort.

Should skateboard wheels turn?

There are no rules for how tight wheels should be. I tighten the nut on the wheel so that the bearings are all-the-way seated into the wheel, and then back it off an eighth or quarter turn. I like them to just barely wiggle back and forth on the axle. This makes them just a little louder and it feels right to me.

What are skateboard wheels?

Skateboard wheels are one of the most important parts of a skateboard, and can have a major impact on the way a board skates. Even the slightest difference in the size or hardness of your wheels can completely change the way a board functions.

What hardness skateboard wheels?

Difference Between Soft & Hard Wheels

  • Soft Wheels. Wheels are considered soft between Durometer 77A and 87A. Softer wheels are great for cruising around and comfy rides.
  • Hard Wheels. You could say that hard wheels are in between Durometer 96A (arguably) and 104A (84B)…
  • Medium-hard Wheels. Bones offers wheels that perform under many circumstances…
What width skateboard wheels?

Wheel diameter will affect things like your speed and the tightness of your turns. Skateboard wheel diameter is normally measured in millimetres, and most wheels range from 50-75mm. So if you need small wheels, shop around the 50mm end of the scale. Similarly, if you’re looking for big wheels, shop around the 70mm end of the scale.

Are skateboard bearings standard size?

Nearly all skateboard bearings have been standardized so that all wheel and bearing brands are compatible. The standard skateboard bearing size is an 8mm inner race diameter.

What is a standard skateboard?

Standard skateboard decks are usually between 28 and 33 inches (71 and 84 cm) long. The underside of the deck can be printed with a design by the manufacturer, blank, or decorated by any other means. "Long" boards are usually over 36 inches (91 cm) long.

What is standard skateboard size?

Length – The length of the skateboard is measured from the tip of the nose to the tip of the tail. Average board length is 28″- 32″. Wheelbase – The wheelbase is the distance from one pair of inner mounting holes to the other inner pair.

What's the standard skateboard size?

An 8mm core, 7mm width, and 22mm outer diameter are universalized as the standard size ...

Can a skateboard be too wide?

Can a skateboard be too big? Skateboard decks vary in width from 7.5″ to 8.25″. If you choose a board with a too-large width for you, you will need to exert excessive power, which can make skateboarding and trick riding difficult. If you choose a board with a too-small width for you, you’ll have trouble balancing and won’t feel stable.