How many inches thick is the average skateboard deck?

9
Jamir Dickens asked a question: How many inches thick is the average skateboard deck?
Asked By: Jamir Dickens
Date created: Wed, Jun 23, 2021 6:43 PM
Date updated: Wed, Jul 6, 2022 7:22 PM

Content

Video answer: What size skateboard should you ride? (7.75, 8.0, 8.25, etc.)

What size skateboard should you ride? (7.75, 8.0, 8.25, etc.)

Top best answers to the question «How many inches thick is the average skateboard deck»

Skateboard deck sizes vary from 7.45 to 8.5 inches in street skating. – 5″ Hanger / 129mm / 7.75″ Axle skateboard trucks fit decks from 7.5 to 8 inches. – 5.25″ Hanger / 139mm / 8.0″ Axle skateboard trucks fit decks from 8 to 8.5 inches.

FAQ

Those who are looking for an answer to the question «How many inches thick is the average skateboard deck?» often ask the following questions:

❓ How many inches is a skateboard deck?

Most skateboards range between 7.5 and 8.4 inches the most popular being 8 inches. At SkateHut you can shop for skateboard decks with a width size of anywhere between a 7.5 inches and 10.5 inches.

❓ How thick is a skateboard deck?

However, the specific deck size is determined by the style preference of the skater:

  • 7.5-inches to 8-inches: street skating or for more technical tricks
  • 8-inches to 8.25-inches: skating pool, ramps, rails, and parks
  • 8.25-inches or higher: verts, pools, and cruising

❓ How thick should a skateboard deck be?

  • The average skateboard deck is about 32 in (81.3 cm) long, 8 in (20.3 cm) wide, and is a little less than 0.5 in (1.3 cm) thick. The deck has a defined nose and tail with a concave in the middle.

Video answer: Skateboard buying guide

Skateboard buying guide

8 other answers

Street Deck Width: Park Deck Width: Shoesize US: Shoesize UK: Shoesize EU: 6.5" 7" 6C - 11C: 5Y - 10Y: 23 - 28: 6.75" 7.25" 7C - 11C: 6Y - 10Y: 24 - 28: 6.825" 7.325" 9C - 12C: 8Y - 11Y: 26 - 30: 7.0" 7.5" 10C - 1: 9Y - 12Y: 28 - 32: 7.125" 7.625" 11C - 2: 10Y - 1: 29 - 33: 7.25" 7.75" 12C - 3: 11Y - 2: 30 - 34: 7.375" 7.875" 13C - 4: 12Y - 3: 31 - 35: 7.5" 8" 1 - 6: 13Y - 5: 32 - 38: 7.625" 8.125" 2 - 7: 1 - 6: 33 - 39: 7.75"

Normally, a skateboard is 28”-33” (70-80 cm) long. The board is divided into three parts: the nose (front), the wheelbase (between the trucks) and the tail (rear). o find out which end is the front and which the rear, take a closer look at your deck. The nose is usually slightly wider and steeper than the tail.

The average width of a skateboard deck is 7.5"- 8.25". The right width depends on your size and skateboarding style. If you buy a deck that is too wide for your height and shoe size, you will need to exert more power, which can make skateboarding and trick riding difficult.

The plank thickness should provide a solid feel for the unsupported distance between joists. If the board is too thin for the span, it will feel spongy or bouncy. Deck joists are commonly 12-inch, 16-inch, or 24” on-center (OC). The greater the distance, the more the board must support over that distance, and the greater the potential for flexing.

Additional Info: Industry standard boards typically consist of 7 or 9 plies of hard maple wood laminated together and pressed into whatever concavous shape makes skateboarders happy. Most technical decks are in the range of 7.25 to 8.5 inches wide and between 29" and 33" inches long (longboards and the increasingly popular 'old school' board shapes vary much greater in width and length).

So, for a deck that is 8″ wide trucks an axle width from 7.875″ – 8.125″ are ideal. A truck with an axle width margin of +/- 0.25″ would work out as well, but we wouldn’t recommend that kind of setup.

Skatebord deck size (length and width) depends on the skater's skills and how you plan to use it. Let us help you determine the perfect deck size for you with our Skateboard Size Chart below: Deck Width 7.5''-8'': Deck Length: 29'' or more. Perfect for: This is a "standard" skateboard, perfect for adults skating the streets and doing some tricks.

Average Skateboard Deck Weight (Does It Matter?) A standard skateboard deck weighs between 2-5 pounds, which means without trucks, bearings, wheels, and grip and you standing on it! In addition with trucks, wheels, and bearings totals range around 7-10 pounds. This fluctuates depending on the components you purchase.

Your Answer

We've handpicked 27 related questions for you, similar to «How many inches thick is the average skateboard deck?» so you can surely find the answer!

How many inches should my skateboard be?

What size skateboard should you get? We recommend starting with a skateboard deck width that is proportional to your shoe size. If you wear men's size 6.5 to 9, start out with a deck width of 7.5 to 8.0 inches. If you wear shoes 9.5 or larger, we recommend getting a deck between 8.0 and 8.5 inches.

How many inches wide is a skateboard?

Most skateboards range between 7.5 and 8.4 inches the most popular being 8 inches. At SkateHut you can shop for skateboard decks with a width size of anywhere between a 7.5 inches and 10.5 inches.

How many inches thick is it safe to begin walking on ice?

Safe ice thickness to walk on

4 inches (10.1 centimeters, cm) is a safe ice thickness for walking, skating or skiing, ice fishing and other similar activities. In all of these cases you should be alone to stay safe on ice. This kind of ice can hold as much as 200 pounds (90 kg).

What is the average weight of a skateboard deck?

Average Skateboard Deck Weight (Does It Matter?) A standard skateboard deck weighs between ...

How many inches is a full size skateboard?

Full-Size Deck [width: 7.5-inches or larger, length: 28-inches]:These are perfect for skaters that are over the age of 13, with height taller than 5'3” and wear a shoe size of 9 or more.

Video answer: How to pick skateboard wheels | custom skateboard

How to pick skateboard wheels | custom skateboard How many inches is a normal sized skateboard?
  • As far as the size goes, skateboards are usually around 30 inches long, with the usual width of about 7 inches, while longboards can go anywhere from 22 to 45 plus inches, with an average width of about 9 inches.
How thick are skateboard bearings?

Skateboard bearings are comprised of seven smaller parts: C-ring: a thin ring that fits into a groove on the outside of the bearing to lock the shields in place. Bearing Shield: a medium-sized ring on the side of the bearing that prevents dirt from getting into the ball bearings. Outer ring: the ...

Video answer: How to build an 8 x10 deck for beginners

How to build an 8 x10 deck for beginners How thick are skateboard decks?

The average skateboard deck is about 32 in (81.3 cm) long, 8 in (20.3 cm) wide, and is a little less than 0.5 in (1.3 cm) thick. The deck has a defined nose and tail with a concave in the middle. Skateboard wheels are usually made of polyurethane and range in width from about 1.3-1.5 in (3.3-3.8 cm).

How thick are skateboard veneers?

Normally this is 1/16″ thick but it can vary depending on the manufacturers specifications. Maple veneer is very prone to expansion and contraction when exposed to moisture content in the air. I have seen our 48″ long cross grain veneers expand up to 3/4″ when sent to a tropical climate.

How thick are skateboard wheels?
  • The industry standard for all inline skate wheels is 24mm thick, and the wheels are usually marked with the diameter size in mm and a number followed by the letter A to identify the wheel's durometer.

Video answer: How to pick your first skateboard

How to pick your first skateboard How thick is a skateboard?

the deck is 7 plys

How thick is skateboard veneer?

Mid-Size Maple Veneer; Longboard Maple Veneer; Longboard Birch Veneer; Extra Long Maple Veneer Pack ; Zigzag Oversize Veneer 7-Layer; Bamboo. Bamboo Single Sheet; Bamboo Veneer 10-Pack; Bamboo Veneer 20-Pack ; Other. Color Veneer Sampler Offcuts; Maple Veneer Sampler Offcuts; Double Wide Veneer Pack; RockitLam; Laser Etching; TAP Kits and Bags ...

What skateboard deck?

Normally, a skateboard is 28”-33” (70-80 cm) long. The board is divided into three parts: the nose ...

How thick is a longboard skateboard?

The most common range for street and park skating is between 50mm and 60mm, while wheels larger than 60mm are usually used on longboards or cruisers.

How thick is a skateboard ply?

There are many thicknesses, wood types and grades of plywood. The best plywood for making skateboards is 1/8″ Baltic or Russian Birch. Typically, Baltic Birch comes in 5′ x 5′ sheets in thicknesses from 1/8 to 3/4″.

How thick is a skateboard wheel?

Skateboard wheel diameter is normally measured in millimetres, and most wheels range from 50-75mm. So if you need small wheels, shop around the 50mm end of the scale. Similarly, if you're looking for big wheels, shop around the 70mm end of the scale.

How thick is a standard skateboard?

The average skateboard deck is about 32 in (81.3 cm) long, 8 in (20.3 cm) wide, and is a little less than 0.5 in (1.3 cm) thick. The deck has a defined nose and tail with a concave in the middle. Skateboard wheels are usually made of polyurethane and range in width from about 1.3-1.5 in (3.3-3.8 cm).

How thick should a skateboard be?

The average skateboard deck is about 32 in (81.3 cm) long, 8 in (20.3 cm) wide, and is a little less than 0.5 in (1.3 cm) thick.

Video answer: Why is wheelbase important on skateboards?

Why is wheelbase important on skateboards? How many layers should a skateboard deck have?

The different layers

A typical deck is made up of 7 layers of veneer, 5 long and 2 cross grain. We offer three set ups for long boards, 7-Layer Sets (5 long and 2 xband), 8-Layer Sets (6 long and 2 xband). and 9-Layer Sets (7 long and 2 xband).

How many plies are in a skateboard deck?
  • The nose of a deck is usually a little bit broader and larger, while the tail is a little smaller. A skateboard’s side view. Shows both kicktails (tail and nose) and a zoomed version of plies. All plies in this skateboard are different colours. Middle ply is pink and there are 7 plies in total. Each deck consists of usually 7-9 layers of wood.
Are skateboard deck thickness?
  • Properties of a Skateboard Deck Decks are shaped a certain way for a reason. They are the lightest, strongest and most responsive shape that skaters use. Most decks are 32” long x 7½"-8½” wide x ½” thick.
How to skateboard deck?

A Skateboard Deck Is Made from Seven to Nine Veneers You might think that a skateboard deck is only a single layer of wood. However, it is made from around seven to nine different pieces of wood sticking together with glue, and people press all of them together to form the deck. A standard deck normally has seven (instead of nine) wooden layers.

What is deck skateboard?
  • The skateboard deck is the flat board on which you stand while crushing or skating. Skateboard deck is made up of material from plastic, bamboo , and maple wood . Choosing a good deck skateboard is little bit difficult task because it is very imported part of this.

Video answer: How to choose the right longboard - the best longboards for beginners

How to choose the right longboard - the best longboards for beginners