How do you restore vintage skateboard wheels?

Sammy Greenholt asked a question: How do you restore vintage skateboard wheels?
Asked By: Sammy Greenholt
Date created: Mon, Feb 8, 2021 6:01 AM
Date updated: Fri, Sep 30, 2022 11:08 AM


Top best answers to the question «How do you restore vintage skateboard wheels»

Gently pry the wheel bearings from the wheels – these will need to be cleaned separately (we'll get on to cleaning skateboard bearings in a minute). Use a rag or an old toothbrush to scrub any obvious mud and grime from your wheels, then place them into a bucket of hot soapy water and leave to soak for ten minutes.

  1. Preparatory. Start by wiping down the entire board with a shop rag…
  2. Remove the wheels from the board. Now to the primary process…
  3. Remove the bearings from the wheels…
  4. Cleaning the pieces…
  5. The Wheels…
  6. Reassemble the bearings in the wheels…
  7. Reattach the wheels to your skateboard.


Those who are looking for an answer to the question «How do you restore vintage skateboard wheels?» often ask the following questions:

❓ How to clean vintage skateboard wheels?

Part 1 of 3: Wheels

  • Remove the wheels from the axle using a wrench. Turn the skateboard over so it is resting on the deck, with the wheels facing up.
  • Pry the bearings out of the wheels with the truck axle…
  • Wipe off the surface of your wheels with a rag to clean off dirt and rocks…
  • Soak the wheels in soapy water for 10 minutes…

❓ How do you restore old skateboard wheels?

  1. Preparatory. Start by wiping down the entire board with a shop rag…
  2. Remove the wheels from the board. Now to the primary process…
  3. Remove the bearings from the wheels…
  4. Cleaning the pieces…
  5. The Wheels…
  6. Reassemble the bearings in the wheels…
  7. Reattach the wheels to your skateboard.

❓ How big are the wheels on a vintage skateboard?

  • The board measures 23 ¼" long x 6" wide. It has unique rear fender skirts and the top of the deck was cast with anti-slip texture. The truck hanger is 1 /34" and the axle is 4 ¼.“ The wheels are "Sure-Grip Super X” clay wheels and are 2 18" in diameter x 1 3/16" wide.

7 other answers

A time when legends were born. We are the largest, most complete source of old school skateboards, trucks, wheels and accessories in the world. We currently have in stock thousands of these classics from Santa Cruz, Powell-Peralta, Vision, Alva, G&S, Tracker, Gullwing, Kryptonics...and many more.

Someone might be holding on to a deck they think is worth $1000's, but if it sells on eBay for $66, then that owner was a bit off the mark. Hopefully, this guide will aid the serious collector who "has been around the block", as well as help new collectors from being "taken" by some not so ethical people out there.

Get the best deals for vintage skateboard parts at We have a great online selection at the lowest prices with Fast & Free shipping on many items! vintage skateboard parts for sale | eBay

Turn the skateboard over so it is resting on the deck, with the wheels facing up. Use a 0.5 inches (1.3 cm) socket wrench to twist and remove the axle nuts on the outer sides of the skateboard wheels, then set them aside. Keep all wheel materials (nuts, washers, etc.) together in one place so you can easily find and attach them later.

Because not everyone has the natural talent and creativity or the desire to suffer through trial-and-error, the following are various step-by-step guides that will walk you through some of the trickier restoration processes: How to Restore a Skateboard by Matt. Filling in Chips by Parker.

SOAKING A SKATEBOARD IN NAIL POLISH REMOVER - YouTube. SOAKING A SKATEBOARD IN NAIL POLISH REMOVER. Watch later. Share. Copy link. Info. Shopping. Tap to unmute. If playback doesn't begin shortly ...

Vintage 1970's Tonka Truck Gravel Spreader Restoration - YouTube. Vintage 1970's Tonka Truck Gravel Spreader Restoration. Watch later. Share. Copy link. Info. Shopping. Tap to unmute. If playback ...

Your Answer

We've handpicked 25 related questions for you, similar to «How do you restore vintage skateboard wheels?» so you can surely find the answer!

How much skateboard wheels?

FREEDARE Skateboard Wheels and Bearings 52mm, Spacers, All-in-one Tool, Skateboard Riser Pads and Hardware Set. 4.2 out of 5 stars. 53. $16.99. $16. . 99. FREE Shipping on orders over $25 shipped by Amazon. +1 colors/patterns.

How skateboard wheels work?

Simply put, the skateboard wheels are the part of your skateboard that allow you to move, and help determine how fast you can go… Skateboard wheels are measured by both diameter and durometer. Diameter is the size of the wheel, and durometer is the hardness of the wheel.

How tight skateboard wheels?

Skateboarders looking to satisfy their need for speed will agree that tight skateboard wheels perform so much faster and provide better stability. In this article, I’ll help you find out how tight should skateboard wheels be. The answer depends largely on your skill level, riding style, as well as safety and comfort.

Should skateboard wheels turn?

There are no rules for how tight wheels should be. I tighten the nut on the wheel so that the bearings are all-the-way seated into the wheel, and then back it off an eighth or quarter turn. I like them to just barely wiggle back and forth on the axle. This makes them just a little louder and it feels right to me.

What are skateboard wheels?

Skateboard wheels are one of the most important parts of a skateboard, and can have a major impact on the way a board skates. Even the slightest difference in the size or hardness of your wheels can completely change the way a board functions.

What hardness skateboard wheels?

Difference Between Soft & Hard Wheels

  • Soft Wheels. Wheels are considered soft between Durometer 77A and 87A. Softer wheels are great for cruising around and comfy rides.
  • Hard Wheels. You could say that hard wheels are in between Durometer 96A (arguably) and 104A (84B)…
  • Medium-hard Wheels. Bones offers wheels that perform under many circumstances…
What width skateboard wheels?

Wheel diameter will affect things like your speed and the tightness of your turns. Skateboard wheel diameter is normally measured in millimetres, and most wheels range from 50-75mm. So if you need small wheels, shop around the 50mm end of the scale. Similarly, if you’re looking for big wheels, shop around the 70mm end of the scale.

What kind of skateboard has wheels and wheels?

Skateboarding wheels use the A scale. So when choosing skate wheels, you’ll immediately know that an 95a wheel is harder than an 80a wheel.How the Durometer Scale Relates to Skate Wheels As we mentioned earlier

Where are the bones wheels skateboard wheels made?
  • BONES Wheels offer the best combination of product performance, durability, quality, and customer service available today. In other words, you might be able to find a lower price, but never a better value. All BONES Wheel unique formulas are solely developed and produced in our own manufacturing plant located in Santa Barbara, CA.
Why are skateboard wheels better than regular wheels?
  • Shark Wheel says its skateboard wheel design gives it better maneuverability over debris, water and other conditions that deteriorate the performance of conventional wheels.
Can you restore a skateboard deck?

Doing the deck restore is only feasible for little damages. When the damages worsen the deck quality, snapping the deck when you land the skate is unavoidable.

How to restore a bad skateboard?

Get a cup and fill it with nail polish remover, the bearing needs to be submerged. Let them rest for about 15 minutes and shake the cup to remove the dust and sand. Repeat this a couple of times and remove them after an hour or so. Wrap the bearing in paper tissues and shake them, don’t be gentle…

8.25 skateboard what size wheels?

56-60mm. *All measurements are basic recommendations, but may change based on personal preference. Risers can be used to prevent wheel bite, we recommend using a 1/8″ riser when you have a 56mm to 60mm size wheel. You can use 7/8″ (flush fit) or 1″ (a little extra) hardware for most setups, we recommend using 1 1/8″ hardware when using 1/8″ risers.

Are 100a skateboard wheels hard?

Companies use a durometer scale to indicate the hardness of the skateboard wheels they make. The lower the number, the softer the wheel… For example, a skateboard wheel with a hardness of 78a would be considered very soft, while one labeled 100a would be hard.

Are 50mm skateboard wheels good?

Go with a wheel size between 50mm and 53mm max for street skateboarding. They won't last you as long as larger wheels but technical tricks require smaller wheels. Get wheels with a hardness of 97a or 99a. 97a are a bit more comfortable on asphalt but 99a is one of the more popular durometers among street skateboarders.

Are 51mm skateboard wheels good?

This is a great size for starting out, particularly for younger skaters. Wheels of this size are suitable for any type of street and transition skateboarding. They won't pick up too much speed when learning to ride down hills.

Are 54mm skateboard wheels good?

The Spitfires aren’t just great for street, you’ll also have a good time riding parks and bowls if you get the 54 mm wheels. I was surprised how fast they are when I skated them in my Local mini ramp, even at 52 mm you go fast and hardly have to pump. The only downside I experienced was that it’s hard to lock them in when grinding a coping.

Are 55mm skateboard wheels good?

A good "starter wheel" is usually 52-55mm, 99A -- well balanced for most terrains. Most wheels today say what they are designed for on the package, so make sure you read the box. [5] X Expert Source Jon Depoian

Are bigger skateboard wheels faster?

Wheels play a major part in going faster on a skateboard. Bigger wheels roll faster than smaller ones. Softer wheels are also grippier and absorb shocks from ground imperfections much better.

Are blank skateboard wheels good?

They were the perfect color for her board, and they made her riding more pleasant. Street riding isn't always the smoothest surface, so these made it a little less bumpy and less loud. Plus, get the Bones Red bearings, they also make the wheels roll better, and they are at a great price.

Are blind skateboard wheels good?

It comes with good components. With 92a, 52mm tall wheels, and tensor trucks. So if you have a younger rider who wants a wider board, this is a good option. In this blind skateboards review, I would say this is the best board. For just under $100, you get a high-quality board. Find out more about the Blind skateboard complete here on

Are bones skateboard wheels good?

Conclusion. Without any doubt, the Easy Streets or Street Tech Formula 99A wheels from Bones Wheels are high-quality wheels. The versatility and performance on different surfaces in particular, as well as the flat spot resistance from the Bones Easy Streets skateboard wheels, managed to win me over during the test.

Are chocolate skateboard wheels good?

Chocolate Skateboards / Erik Herrera. Watch The Clip Follow Erik. Vincent Alvarez. Kenny Anderson. Justin Eldridge. Jesus Fernandez. Stevie Perez. Chris Roberts. Raven Tershy.

Are element skateboard wheels good?
  • Wheels And Bearings Of The Element Skateboard The wheels measure 52mm which makes them safe for tricks and stable for street and park skating. If you are looking for speed then these wheels run small so they are not designed for high speed but they have an amazing level of balance and constancy.
Are enjoi skateboard wheels good?

For the price, they're very beautiful wheels, and they roll very smooth and quick. The main problem was though: there's a great lack of traction compared to all of the other wheels I have had. Then again, you could be used to the lack of traction.