Can you grease skateboard bushings?

9
Cara Dibbert asked a question: Can you grease skateboard bushings?
Asked By: Cara Dibbert
Date created: Fri, Feb 12, 2021 4:08 PM
Date updated: Thu, Jun 23, 2022 9:57 AM

Content

Top best answers to the question «Can you grease skateboard bushings»

A good thing to do is put a smear of grease, oil, WD40 or dry lube stick on the top and bottom flat surface of the bushings. This just helps the hanger 'slip' back to it's correct position. If you ride your trucks a bit they will 'break in' and it will probably sort it's self out pretty quickly.

FAQ

Those who are looking for an answer to the question «Can you grease skateboard bushings?» often ask the following questions:

❓ Why are skateboard bushings called bushings?

  • The bushings on your skateboard are those rubber rings that are attached to the trucks on your board. Every truck has two bushings that each serve their own purpose. But the main reason why the trucks on your board have bushings is so that you can make sharp turns and pivots easily and safely.

❓ Why are skateboard bushings called downhill bushings?

  • As the name suggests, the top and bottom bushings are identical and barrel shaped. These bushings are also called downhill bushings because the superior stability they offer makes them a great choice for skating downhill at high speeds.

❓ Are skateboard bushings interchangeable?

There are a lot of different types of bushings but not all are suitable for every skateboard. If you ride a regular skateboard barrel/cone bushings with a hardness between 87A and 92A should be fine. Heavier riders should consider 94A, kids need softer bushings, 85A to 90A should work for most kids under 12.

8 other answers

All of that said, you can use any grease you like, but the manufacturer’s grease or a silicone based substitute with a PTFE additive is going to be your best bet for proper operation and longevity. Mixing lubricants is generally not a good idea since different types are rarely compatible.

If caught early enough, YourMechanic can clean and properly lubricate the bushings with a grease gun to avoid additional damage being done. How do you fix a squeaky bushing on a skateboard? The best way to eliminate this annoying noise is by taking a few shavings of bar soap or wax and dropping them into the empty pivot cup (make sure you take your hanger out first).

You don’t need to remove the bushings completely but you do want to make sure they’re free from debris. Step Six: Reassemble your board by putting on the rubbers, bushings and pivot cups. Step Seven: Put the wheels on your board (grease them first with some bike grease or wax to prevent squeaks) and tighten down the axle nuts that hold them in place.

You can speed up the drying time after you have removed the bearings from the solvent by using a hair dryer on them. Grease can be used instead of oil; however, bearings lubricated with grease tend not to spin as fast, according to SkateLog.com. Oil intended specifically for use on skateboard bearings is available.

You can’t go wrong with $15 bearings that are by far superior than their competitors. I’ve been on boards with higher quality bearings, yes they’re amazing. It’s a matter of personal preference, and how well you maintain your equipment. Skateboard bearings can last years if you want them to. Just proper upkeep will give you desired results.

Congratulations. You've just cleaned and re-greased your skateboard bearings. Grease is nice because it needs maintenance less often than oil. On the other hand, it probably spins a little slower. Still, a clean and lubed bearing spins much much better than a dirty one, so it's good for you in the long run.

What can you use to lubricate skateboard bearings? You can either use grease or oil. The only difference is in viscosity. Grease is thicker, it lasts longer but also makes your bearings a bit slower. Oil is thinner and makes your bearings ride full-speed, but it lasts shorter. Some general-purpose greases and oils can be used for skateboard bearings, white lithium grease works great, for example.

When you get friction in that spot from putting a lot of pressure on the baseplates by heavy turning, it can start to squeak. The best way to eliminate this annoying noise is by taking a few shavings of bar soap or wax and dropping them into the empty pivot cup (make sure you take your hanger out first). Then just distribute the soap/wax around the pivot cup evenly with your pinky finger or the actual pivot of the hanger.

Your Answer

We've handpicked 23 related questions for you, similar to «Can you grease skateboard bushings?» so you can surely find the answer!

Do new skateboard bushings squeak?

A bit of squeakin is expected when the bushings wearing are wearing in. If the squeak is really loud it's probably the pivot cup - loosen the kingpin til you can drop a tiny bit of butter in the pivot cup to stop that noise.

Do skateboard bushings get softer?

Skateboard Bushings Hard vs. Soft. Softer bushings will help you turn better but offer less stability. Harder bushings will cause your trucks to be tighter and increase stability, turning your skateboard will be more difficult. You can adjust the tightness of your trucks but only to some extent.

Do skateboard bushings go bad?

Instead, they allow for deep turning and increase rebound as you lean, giving your skateboard a snappier return to center. This is good for when you want a lively, bouncy turning response or when you’re riding low-rebound bushings. It is really really bad for downhill and freeriding.

Do you lubricate skateboard bushings?

Squeaky noise - put some lubricant around the bushing (that's the squishy thing that compresses when you turn) AND the pivot (that's the little wiener thing that fits down into a sleeve that acts as the fulcrum for turning). You can use just about any lubricant, from dedicated skate lube to coconut oil.

Do you need skateboard bushings?

Bushings are a very important part of skateboard trucks. Every truck is equipped with two bushings – the street-facing top bushing, and the board-facing bottom bushing. Like skateboard wheels, bushings are made of polyurethane, i.e. plastic… Don't worry though, all skateboard trucks come already equipped with bushings.

How are skateboard bushings made?

Bushings are generally made from the same material as the wheels on your skateboard. They work by helping you steer and move around when you are on your skateboard. As mentioned, the top bushing allows you to turn and steer your board. Meanwhile, the one on the bottom focuses more on stability and responsiveness.

How are skateboard bushings rated?

You can also use this for different other applications, such as inline skate, roller skate, rollerblade, and much more. This comes in with high-precision rating as well, and the fact that it has been classified under ABEC 7 means you can expect a lot from this beast.

How do skateboard bushings work?

As with skateboard wheels, the hardness of bushings is given in durometers using the unit A. The higher this number is, the harder the polyurethane. The effect the hardness of your bushings has on driving behaviour is relatively simple: Note: The harder the bushings, the less responsive your trucks are when turning.

How to choose skateboard bushings?

In general, the right skateboard bushings for each style comes down to:

  • For street skating and technical tricks get cone/barrel-shaped or cone/cone-shaped bushings.
  • For vert, bowl, and park skating get cone/barrel-shaped bushings.
  • Longboards require softer bushings that allow for carving.
  • Downhill and racers require stiffer bushings that provide stability.
How to soften skateboard bushings?

1. Take the old bushings out of your trucks, keep the little metal washers though because you'll need them to put your new soft bushings back on the trucks after you've done the rest of this tutorial. 2. Once you get all of those bushings out just heat up a pot of water and stick the bushings in there. Let them sit for about 10/15 mins.

What are bushings on skateboard?
  • Bushings are the rubber rings that are attached to your trucks kingpin . They help you make turns and pivot your board and are made of polyurethane. Picking the right skateboard bushings depends on what type of board you ride, your style, your weight, and your personal preference.
What do skateboard bushings do?

Introduce. Bushings are an essential component of skateboarding. But, do you know everything about them? What are bushings on a skateboard? This article of Skateboard Cast will give you an all-in-all introduction to bushings. Let’s read on to learn more about them.

What size are skateboard bushings?

Choosing the bearing size for your skateboard wheels can never go wrong, and you can be assured of it. An 8mm core, 7mm width, and 22mm outer diameter are universalized as the standard size skateboard bearing size and these measurements are meant to fit any wheel you choose.

What skateboard bushings to buy?

Cone/barrel bushings (also known as standard barrel or conventional bushings) are the most common shape for skateboard bushings because they are so versatile. The bottom bushing is barrel shaped, which allows it to fit securely into the bushing seat, and the conical top bushing creates a lot of deck lean, making it easier to carve.

Who makes good skateboard bushings?
  • Dimebag Skateboard Truck Bushings…
  • Bones Wheels Hard Bushings…
  • DreamFire 92A Skateboard Bushings…
  • Shappy Skateboard Truck Bushings…
  • Bones Wheels Hardcore Bushings…
  • Orangatang Skateboard Bushings…
  • Shorty's 92A Doh-Doh Skateboard Bushings…
  • Independent 90A Cylinder Cushions.
Can you grease skateboard bearings?

Grease - for maximum protection againist water at the expense of roll speed, use a thick engine grease. We recommend Bones Speed Cream or Sabre Bearing Lube - these are skate-specific lubes that don't protect from water ingress as well, but are specially designed for skateboard bearings and rolls much faster.

Do skateboard bearings need grease?

You've just cleaned and re-greased your skateboard bearings. Grease is nice because it needs maintenance less often than oil… For greased bearings, try once every month at first or more often if you're in the wet a lot. Oiled bearings need maintenance every couple weeks if you ride every day.

How to grease skateboard bearings?

Clean and Grease Your Skateboard Bearings Step 1: What You Need. Dirty skateboard bearings… A bowl or cup to put it in. A small pin or straightened staple to... Step 2: Pop the Seals. There are two kinds of seals that are common on skateboard bearings: rubber seals (pictured) and... Step 3: ...

Should you grease skateboard trucks?

A good lithium grease is almost always a better option, but if the squeaking is coming from the pivot cup (which is usually the most common source of squeaks, especially on new trucks), a small amount of dish soap/washing up liquid in there can also do the trick.

A buyers guide for skateboard bushings?

The Ultimate Skateboard Bushings Buyers Guide. Written by Ruben Vee. in Buyers guides. Bushings are the rubber rings that are attached to your trucks kingpin. They help you make turns and pivot your board and are made of polyurethane. Picking the right skateboard bushings depends on what type of board you ride, your style, your weight, and your ...

Are all skateboard bushings the same?
  • And while bushings are generally made from the same type of material, you have to know the fact that there are plenty of different types of skateboard bushings that should be used in different types of situations. It really depends on a combination of your size, skating style, and personal preferences.
Are bushings required on a skateboard?

Bushings are a very important part of skateboard trucks… Don't worry though, all skateboard trucks come already equipped with bushings. Manufacturers choose a standard setup, perfectly matched to the trucks, and suitable for the most skaters.

Are skateboard bushings supposed to squeak?

A bit of squeakin is expected when the bushings wearing are wearing in. If the squeak is really loud it's probably the pivot cup - loosen the kingpin til you can drop a tiny bit of butter in the pivot cup to stop that noise.