Are all skateboard axle nuts the same size?

10
Liam Crist asked a question: Are all skateboard axle nuts the same size?
Asked By: Liam Crist
Date created: Thu, Apr 29, 2021 11:48 AM
Date updated: Sun, May 29, 2022 12:06 AM

Content

Top best answers to the question «Are all skateboard axle nuts the same size»

Having brand new lock nuts will keep your wheels from falling off… These axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size). The thread size for these axle nuts is 5/16".

FAQ

Those who are looking for an answer to the question «Are all skateboard axle nuts the same size?» often ask the following questions:

❓ What size are skateboard axle nuts?

You often see them in sets of eight bolts and eight nuts. 7/8″ (for no risers) and 1″ (with 1/8″ risers) are the most frequent sizes of skateboard hardware. Most skateboard layouts should be able to be put together with these sizes of hardware.

❓ Are all skateboard nuts the same size?

Having brand new lock nuts will keep your wheels from falling off… These axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size). The thread size for these axle nuts is 5/16".

❓ What are axle nuts on a skateboard?

These axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size). The thread size for these axle nuts is 5/16".

9 other answers

12 mm. The rule is, for a skateboard you need a 14 mm, 12 mm, and 10 mm socket. 17.1K views. ·. View upvotes. Alex Preston. , Die hard rider since 2001. Answered 4 years ago. The standard size of a skateboard's axle nut 5/16"-24tpi, and needs a 1/2″ SAE wrench to install.

Hardware is necessary to attach the truck assembly to the actual skateboard deck and comes in sets of 8 bolts and 8 nuts. The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups.

Speed rings are small washers, the same size as the core of your bearings. They are situated between the bearings and hangers as well as between the bearings and axle nuts. They prevent the bearings from rubbing against the other components. Have you lost a few speed rings while mounting your wheels?

Small and hard wheels are fast and good for performing tricks and shredding skateparks and sidewalks. They range in size from 52 mm to 58 mm. Axle Nuts. A complete skateboard uses four axle nuts that keep the wheels in place and spinning. They tend to wear out quickly, so they should be replaced once in a while.

10mm x 26 tpi Rear axle, quick release, Campganolo® Note that the difference between 24 and 26 tpi is small and can be subtle, meaning that if you're using a spanner to do the nut up you can wreck the nut without really noticing that anything is wrong. The symptom is often that the nut strips before ever becoming tight.

Some people actually like trucks that don’t match their board size. A couple of pros skate narrow trucks that don’t fit their board because it improves flip speed. Others like wider trucks because it provides a more stable ride. In general, just makes sure the axle width matches your deck’s width. Wide vs Narrow Trucks

Not all axles have brakes, but the bearing sizes are still the same, either brake or idler. Rarely, I have seen a LM67048 Outer bearing used on the #42 spindle (light duty) *** on Some Square Tube axles, found almost always on Boat Trailers (EZ Loader, Ranger, etc) Made by UFP, the grease seal will be slightly smaller ID of 1.68".

Skateboard bearings are the round metal pieces that fit inside the wheels to mount the wheels to the axle. Regardless of wheel size, all skateboard bearings are the same size and will fit any skateboard wheel that Warehouse Skateboards sells. The universal measurements for bearings are 8mm (core), 22mm (outer diameter), and 7mm (width).

3. Nuts & Bolts – The right length. 3. How to get the right length for your skateboard setup! Selecting the right bolt length is fairly simple. If you skate without shock or riser pads, you will only ever need 7/8” – 1” bolts. If you use standard shock pads, with a height of 1/8”, you’ll need 1” – 1 1/8” long bolts.

Your Answer

We've handpicked 21 related questions for you, similar to «Are all skateboard axle nuts the same size?» so you can surely find the answer!

Are all skateboard kingpins the same size?

The difference between high, mid /standard and low skateboard trucks is seemingly negligible. As it so often happens, however, the finer details are crucial. It all boils down to your body height and most importantly, the size of the wheels. The higher the truck, the more the tail has to be pushed down when popping.

Are all skateboard trucks the same size?
  • Ideal truck size (axle width) is the width from one edge of your board to the other. The majority of trucks are produced to be suitable for most 7.5” to 9” + deck widths. Trucks are available in varying heights and each is better suited for various skateboarding styles and activities. In general, there are LOW, MID, and HIGH truck styles.
Are skateboard bushings all the same size?

Bushing tightness depends on each rider's preferences, and bushings can be easily adjusted to suit your needs. Skateboard truck bushings are all the same size, and will fit any skateboard, longboard, or cruiser sold on Warehouse Skateboards. Check out the available skateboard truck bushings currently in stock.

Is all skateboard hardward the same size?

Skateboard Hardware

The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups. If you're using riser pads with a height larger than 1/8”, then longer hardware sets may be required. Are all skateboard truck bolts the same size?

Hardware is necessary to attach the truck assembly to the actual skateboard deck and comes in sets of 8 bolts and 8 nuts. The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers)… Use a 3/8” socket size tool to change hardware.

Are longboard and skateboard bearings the same size?

There is no difference between the skateboard and longboard bearings. Regardless of the size of your wheels or type of skating you do, street skate or longboard, the bearings are the same size. The only thing you need to pay attention to is the dimension of the bearing spacers.

What nuts do skateboard trucks use?

The standard size of a skateboard's axle nut 5/16"-24tpi, and needs a 1/2″ SAE wrench to install. When searching for them in a hardware store, make sure it has a self-locking feature, like a portion of nylon threads at one end.

Does a skateboard have an axle?

Typically, skateboard trucks consist of a base plate, hanger (the movable and grindable part of the truck to which your wheels are attached), the kingpin and kingpin nut which hold these two pieces together, as well as the bushings and the washers. The protruding part on which your wheels are attached is the axle.

What is an axle nut skateboard?

Axle nuts are used to secure your wheel/bearing build to the truck itself

Do skateboard trucks come with wheel nuts?

Skate hardware is the nuts and bolts that hold your trucks onto your deck. They come in a variety of shapes, sizes, fitments, and colors. Unlike other skate components, you don’t really get manufacturers that only produce skate hardware, the best skate hardware is usually made by Truck or Wheel companies. Size & Diameter

How tight should wheel nuts be skateboard?
  • Typically, you will need a 1 1/16-inch socket for roller skate wheels, but it will vary depending on roller skate models. Attach the wrench to the tension nut and turn the handle until the nut reaches the desired tension. Aim for a medium level of tightness.
How tight should axle nut skateboard be?

Wheels are attached to the axels with a single nut (1/2") per wheel. The nuts should be tightened as far as they can be without impeding the spin of the wheel. Generally you should feel only a very minor amount of play if you try to move the wheel side to side.

Is a skateboard a wheel and axle?
  • Is a skateboard a wheel and axle? The skateboard itself has a number of simple machines that make it functional and fun. Modern decks have an upturned nose and tail. Another simple machine on the skateboard is the wheel and axle, consisting of the urethane wheels with sealed bearings and the axle that extends through the truck.
What is an axle on a skateboard?

The truck’s axles are where you attach your wheels and run through the hangar. The side has a thread where you attach the nut to secure your wheels. It’s important that the axle is made of quality steel or titanium because the axles deal with lots of force. A bent axle means buying a new truck.

Where is the axle on a skateboard?

Description: The axle is a metal rod that runs through the truck hanger, protruding a couple of inches on either side. One wheel is inserted on either end and held in place by the axle nut.

How do you tighten nuts on a skateboard?

Put a washer on the outside of the wheel and begin hand-tightening the nut, clockwise. Once the nut is threaded, use your skate tool or adjustable wrench to finish tightening. A good rule of thumb is to be able to spin the wheel freely without being able to wiggle the wheel.

How to clean your skateboard nuts and bolts?

Use a 13mm or ½ inch socket wrench for the removal of the axle bolts and nuts on the outer sides of the wheels. Make sure to put all the wheel materials together in a place so you could find them easily when fixing back after cleaning. You should know this is necessary if you don’t want your skateboard to end up missing one or two components.

What can you use to tighten skateboard nuts?
  • You don’t necessarily need a skate tool to do any adjustments. You can tighten the nuts by using a wrench or screwdriver as well. The screwdriver has to match with the nuts size in this case because only then you will be able to adjust it. So, if you don’t have a skate tool find a wrench or screwdriver in your house.
Can a skateboard axle be flipped upside down?
  • Additional Info: After much abuse, the axle nut and/or the end of the axle itself can become worn enough that removing or attaching the nut becomes difficult or impossible. If this happens, try flipping the nut upside down, using a different nut, or replacing the truck altogether.
How big is a royal skateboard truck axle?
  • Most brands manufacture trucks that start at 5.0 inches and increase them by 1/4 inch scale. Just check the chart at the top of the page to see what I mean. That’s not the case with Royal though, their 5.5 inch is actually about 5.8 inch and an 8.75-inch axle. To be honest, the slight deviations don’t really matter.
How big is a skateboard truck axle width?
  • Truck axle width and matcing skateboard deck width Axle width Truck width 6.0″ to 7.25″ 6.5″ to 7.25″ 7.5″ 7.25 to 7.5″ 7.75″ 7.5” to 8.0″ 8.5″ 8.5” to 9.o″ 2 more rows ...